Product | SP25Y |
Performance parameters | |
Huremu hwekushanda (Kg) | 22000 |
Hukuru hwekusimudza simba (T) | 25 |
Yakayerwa simba reinjini (kw/hp) | 120Kw |
Diminimum turning radius (mm) | 2950mm |
Ground pressure (Mpa) | 0.07 |
Injini | |
Injini muenzaniso | WD10\SDEC SC11CB |
Nhamba yemasilinda × silinda dhayamita× sitiroko (mm×mm) | 6-126×130\6-121×152.4 |
Yakayerwa simba/yakayerwa kumhanya (kw/rpm) | 120/1850 |
Maximum torque (Nm/r/min) | 746±6%/810±6% |
Zviyero zvakazara zvemuchina | |
Urefu (mm) | 4000 |
Upamhi (mm) | 3050 |
Urefu (mm) | 2954 |
Kutyaira kuita | |
Pamberi giya 1/Reverse giya 1 (km/h) | 0-3.29/0-4.28 |
Pamberi giya 2/Reverse giya 2 (km/h) | 0-5.82/0-7.59 |
Pamberi giya 3/Reverse giya 3 (km/h) | 0-9.63/0-12.53 |
Traveling system | |
Hydraulic torque inoshandura | Zvinhu zvitatu-chikamu chimwe-chikamu uye chikamu chimwe chete |
Transmission | Planetary giya, multi-plate clutch, uye hydraulic + yekumanikidza lubrication mhando |
Main drive | Spiral bevel giya, imwe-nhanho deceleration uye splash lubrication |
Steering clutch | Rudzi rwemvura, yakawanda-ndiro chitubu chakaiswa, hydraulically yakaburitswa, uye nemaoko-hydraulically inoshanda |
Mabhureki ekufambisa | Rudzi rwakanyorova, rudzi rwebhandi rinoyangarara, uye hydraulically rubatsiro |
Final drive | Matanho maviri-yakatwasuka giya rekudzora uye splash lubrication |
Chassis System | |
Suspension mode | Rigid crossbeam chimiro |
Chinhambwe chepakati chenjanji (mm) | 2050 |
Kufara kweshangu dze track (mm) | 560 (Sarudzo 610) |
Kureba kwepasi (mm) | 2635 |
Nhamba yeshangu dze track (Rimwe divi / chidimbu) | 39 |
Chain track pitch(mm) | 203.2 |
Nhamba yevanotakura rollers (Rimwe divi) | 2 |
Nhamba yetrack rollers (Rimwe divi) | 7 |
Kushanda hydraulic system | |
Pombi inoshanda | Yakagadziriswa giya pombi, ine yakanyanya kusimuka pa100ml/r |
Pilot pombi | Yakagadziriswa giya pombi, ine yakanyanya kusimuka pa10ml/r |
Ivhavha yekushanda | Proportional multi-nzira vharafu |
Counterweight humburumbira bore(mm) | φ110 |
Tangi kugona | |
Tangi remafuta (L) | 315 |
Kushanda hydraulic mafuta tank (L) | 148 |
Kushanda mudziyo | |
Hurefu hwepamusoro hwekusimudza(mm) | 4400 |
Hoko inosimudza kumhanya m/min | 0–12 |
Kureba kweboom (m) | 5.5 (Sarudzo 6.1) |