Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

IBULLDOZER

I-DH10-C2
AMANDLA ENTJINI
Nge-86kW/2200rpm, le njini ihambelana ne-China-III/EU Stage IIIA emission regulation.
Ubunzima BONKE
9680kg/10140kg
I-DH10-C2
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Inkqubo yaMandla
  • Inkqubo yokulawula
  • Indawo yokuqhuba/yokukhwela
  • Ukuziqhelanisa nokusebenza
  • Ukusebenza okusebenzayo
  • Ulondolozo olulula
  • Inkqubo yaMandla

    • Injini yolawulo yombane ye-Cummins efakiweyo ihambelana ne-China-III/EU StageⅢA yolawulo lokukhutshelwa kwaye ibonakalisa amandla awomeleleyo kunye nokonga amandla okuphezulu kunye nokulungelana kokusingqongileyo.Inkqubo yamafutha enemigangatho emithathu yokucoca iqinisekisa ukuziqhelanisa nedizili ekumgangatho ophantsi kwiimarike zase-Asia-mpuma.

    • Itekhnoloji ye-Shantui ye-hydrostatic drive optimization isetyenziswa ukuphumeza ukusebenza kakuhle kunye nolona qoqosho lwamafutha olufanelekileyo:

  • Inkqubo yokulawula

    • Imodyuli ephindwe kabini (uMsebenzi nokhuseleko) uyilo lolawulo luqinisekisa enye kwenye ukuze kuphunyezwe ukhuseleko oluphezulu nokuthembeka.

    • Ukungasebenzi kakuhle kokuzixilonga kunikezelwe ukubonisa ngokuchanekileyo unobangela wokungasebenzi kakuhle kunye nokuqhelaniswa nako kunye nokunciphisa ixesha lokuphumla.

    • Isoftware yenkonzo enofikelelo olwahlukileyo lobuqhetseba ibonakalisa ukulula okuphezulu kunye nokwenzeka nokufunda nokuqonda ngokulula.

  • Indawo yokuqhuba/yokukhwela

    • Ikhabhu edityanisiweyo etywiniweyo enamanqaku asi-8 okufunxa ukothuka ibonakalisa ingxolo ephantsi kunye nokungcangcazela, indawo enkulu, kunye nokubona kakuhle.

    • Iingcango eziphangaleleyo kunye neefestile zivumela umqhubi ukuba abone ngokucacileyo zonke iikona ze-blade kunye ne-ROPS edibeneyo yokwandisa ngokuphawulekayo imbonakalo yecala lomatshini.

    • I-pedal ye-accelerator exhonyiweyo inevolumu encinci, indawo enkulu yonyawo, kunye nokukhululeka kokusebenza okuphezulu.

    • Isitulo esihonjiswe ngoomatshini sibonelela ngoluhlu olukhulu lohlengahlengiso kwicala le-longitudinal kunye ne-backrest position.I-armrests ibonisa ukuthungwa okukhululekile kunye nommandla omkhulu.I-ergonomic joystics ibonelela ngamava okusebenza akhululekileyo kumqhubi.

  • Ukuziqhelanisa nokusebenza

    • Umatshini wamkela inkqubo yokuqhuba i-hydrostatic drive-circuit double-circuit electronics controlled electronically controlled hydrostatic drive system ukuqinisekisa ukuziqhelanisa kakuhle nomthwalo, ukukwazi ukulayishwa kunye ne-in-situ steering, ukulawulwa kwesantya esingenanyathelo, kunye nokuguquguquka okuphezulu kunye nokusebenza kakuhle kunye nokuqonda ukusebenza okubalaseleyo kolwakhiwo kwiindawo ezimxinwa.

    • Inkqubo ye-chassis inobude obude bomhlaba, ukucoceka komhlaba okuphezulu, ukuqhuba okuzinzileyo, kunye nokuhamba okugqwesileyo.Isakhelo sokutsalwa esisemgangathweni kunye nesixhobo sokukrazula se-shank ezintathu ozikhethelayo siqinisekisa umthamo ophezulu wokusebenza.Izibane ezisebenzayo ze-LED zokukhanya okuphezulu kokukhanya ziphucula amandla okukhanyisa ngexesha lomsebenzi wasebusuku ukufezekisa ukhuseleko oluphezulu kunye nokuthembeka.

  • Ukusebenza okusebenzayo

    • Uhambo luqhutywa yi-joystick yolawulo lwe-elektroniki enye kwaye isixhobo esisebenzayo siqhutywa yi-joystick engu-pilot enye, ebonisa imisebenzi ebhetyebhetye, ephathwayo, kunye nekhululekileyo.

  • Ulondolozo olulula

    • Amalungu olwakhiwo azuze umgangatho obalaseleyo weemveliso ezivuthiweyo zikaShantui.

    • Iintambo zombane zisebenzisa imibhobho yamalahle engenamthungo kunye nezikhonkwane zokudibanisa ukuze zidibanise, ezinomgangatho wokhuseleko oluphezulu.

    • Awona malungu angundoqo ombane kunye ne-hydraulic amkela iimveliso ezivela kumazwe angaphandle, ezinomgangatho ozinzile nothembekileyo kunye nokuthembeka okuphezulu kakhulu.

    • Uyilo lwemodyuli yesakhiwo somatshini sibonisa ukuchithwa okulula kunye nokudibanisa, ukulungiswa okulula, izinga eliphantsi lokungaphumeleli, kunye nokugcinwa lula.

ipharamitha
Igama lepharamitha I-DH10-C2 XL (Uguqulelo olwandisiweyo) I-DH10-C2 LGP(Uguqulelo lwe-Super-wetland)
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg) 9680kg/21341lb (Ngesakhelo sokutsala) 10140kg/22355lb (Ngesakhelo sokutsala)
Uxinzelelo oluphantsi (kPa) 44.4 34
Injini
Imodeli yenjini QSF3.8 QSF3.8
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm) 86/2200 86/2200
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm) 4442*2860*2885 4442*3200*2885
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h) 0~9km/h(5.6mph) 0~9km/h(5.6mph)
Ukubuyisela umva isantya (km/h) 0~9km/h(5.6mph) 0~9km/h(5.6mph)
Inkqubo yeChassis
Umgama osembindini wengoma (mm) 1650 1790
Ububanzi bezihlangu zomzila (mm) 460 630
Ubude bomhlaba (mm) 2320 2320
Umthamo wetanki
Itanki yamafutha (L) 197 197
Isixhobo esisebenzayo
Uhlobo lweblade PAT PAT
Ubunzulu bokwemba (mm) 450 450
Uhlobo lweRipper Ukukrazula kwamazinyo amathathu Ukukrazula kwamazinyo amathathu
Ubunzulu bokukrazula (mm) 340 340
cebisa
  • BULLDOZER SD17-B3
    SD17-B3
    AMANDLA ENTJINI:
    140kW/1900rpm China-II compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17000kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WD10
  • BULLDOZER DH16-K2
    DH16-K2
    AMANDLA ENTJINI:
    142kW/2100rpm , US EPA Tier 4 final/EU Stage Ⅳ emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17635kg/18800kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    N67
  • IBULLDOZER SD20-C6
    SD20-C6
    AMANDLA ENTJINI:
    Nge-162kW/1950rpm, le njini ihambelana nomthetho wokukhutshwa kwe-China-III. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    21,000kg (kubandakanywa ripper) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP12
  • TRIMMING BULLDOZER STR13
    STR13
    AMANDLA ENTJINI:
    With 105kW/1900rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    14500kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • BULLDOZER SD16
    SD16
    AMANDLA ENTJINI:
    131kW/1850rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17,000kg (Standard) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WD10/WP10
  • TRIMMING BULLDOZER STR23
    STR23
    AMANDLA ENTJINI:
    With 180kW/2000rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    25540kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO