Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

IBULLDOZER

I-DH46-C3
AMANDLA ENTJINI
380kW/1800rpm eTshayina-Ⅲ iyahambelana
Ubunzima BONKE
56000 kg (Eqhelekileyo)
I-DH46-C3
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Inkqubo yaMandla
  • 2.Inkqubo yokulawula
  • 3. Indawo yokuqhuba/yokukhwela
  • 4. Ukuziqhelanisa nokusebenza
  • 5. Ukugcinwa lula
  • Inkqubo yaMandla

    ● I-injini ye-Cummins QSX15 ephuma kumazwe angaphandle ixhotyiswe, inomgangatho othembekileyo kunye namandla anamandla.I-injini ibonisa ukusebenza kakuhle kwe-thermal kunye noqoqosho oluhle lwamafutha.Imowudi yayo ye-ECO idibene nomatshini inciphisa ukusetyenziswa kwamafutha malunga ne-15% xa kuthelekiswa nemowudi yayo yaMandla.

    ● Itekhnoloji ye-Shantui yobunikazi obunelungelo lobunikazi bomdlalo wamandla idibanisa kunye neendawo eziphezulu ze-hydraulic ze-Linde ukukhuthaza ukusebenza kakuhle kwenkqubo yokuqhuba umatshini.Umsebenzi wokuziqhelanisa nomthwalo ozenzekelayo, umsebenzi wokukhawulezisa igiya, kunye nomsebenzi wokuqhuba i-pivot ucutha ngakumbi ixesha lohlengahlengiso lomatshini kunye nokuphucula ukusebenza kakuhle kolwakhiwo.

  • 2.Inkqubo yokulawula

    ● Ngokubhekiselele kumsebenzi wokulawula umatshini, inkqubo yokulawula umatshini we-multi-motor multi-motor hydrostatic system ilungelelanisa ngokuzenzekelayo isantya somatshini kumthwalo, ongafuni ukulungiswa ngesandla kweegesi."Imowudi yamandla" kunye "nemodi ye-ECO" ingatshintshwa nangaliphi na ixesha ukulungelelanisa iimfuno zokusebenza.Ulawulo oluchanekileyo lokuqhuba, ulawulo lomyinge wokuhamba, ulawulo lokubuyela umva lwegiya, ukusetwa kwesantya, ukusetwa kwemowudi yokunyovwa, kunye nemisebenzi yokuzenzela ngokuzenzekelayo ilungelelanisa imikhwa yokusebenza yakhe wonke umqhubi.

    ● Umsebenzi wolawulo oluzenzekelayo weqondo lokupholisa kunye nobushushu be-oyile yolwelo loxinzelelo lwe-hydraulic luhlengahlengisa ngokuzenzekelayo amandla okuphelisa ubushushu ukuze kugcinwe inkqubo isebenza kowona bushushu ufanelekileyo.

    ● Ukuxilongwa ngokuzenzekelayo kokungasebenzi kakuhle, ukulinganisa, kunye nesilumkiso, isikhumbuzi sebhanti lesitulo, isalathisi sesimo somzimba, iswitshi yokumisa kaxakeka, ikhamera ebuyela umva, kunye nesibane sokuhamba nesibane siphucula ukhuseleko lokusebenza komatshini.

  • 3. Indawo yokuqhuba/yokukhwela

    ● Izinto ezifunxa isandi zicwangciswe kwiindawo ezifanelekileyo zokulawula ingxolo yomatshini kude lee ngaphantsi kweemfuno zomgangatho woshishino.

    ● Isitulo esinomgangatho womoya we-Sears esiphuma kumazwe angaphandle sibonisa i-cushion ekhululekile kunye nohlengahlengiso olulula kunye nomsebenzi ozikhethelayo wokufudumeza umqamelo uyanikezelwa.

    ● Isihlalo sithambekele ngasekunene nge-15 ° ngokubhekiselele kwi-axis yomzimba womatshini yenza lula ukubonwa kwemeko yokusebenza kwe-ripper kwaye iphucula induduzo yokusebenza kwe-ripper.

    ● Zombini isixhobo sokuhamba kunye nesixhobo esisebenzayo siqhutywa yi-joystick eyodwa ukufezekisa ukulula okuphezulu kunye nokuguquguquka kunye nokuqinisekisa ukuqala okulula kubaqhubi abangenamava.

    ● Inkqubo edibeneyo ye-A / C ilungisa izikhundla zokukhutshwa komoya.Izixhobo ezenziwe ngabantu, kubandakanywa i-terminal yemultimedia, isilayidi secuba, umbane wangaphandle we-12V, izibuko lokutshaja i-USB, kunye nomthunzi welanga, ziyadityaniswa.

  • 4. Ukuziqhelanisa nokusebenza

    ● Umatshini wamkela inkqubo ye-hydrostatic drive elawulwa nge-elektroniki ukufezekisa ukukwazi ukuziqhelanisa nomthwalo omhle, ukukwazi ukulayishwa kunye ne-pivot yokulawula, ukulawulwa kwesantya esingenasinyathelo, kunye nokuguquguquka okuphezulu kunye nokusebenza kakuhle kunye nokuqonda ukusebenza okugqwesileyo kokwakhiwa kwiindawo ezimxinwa.

    ● Inkqubo ye-chassis ibonisa ubude obude bomhlaba kunye nokukhutshwa komhlaba ophezulu kunye nohlobo lwe-K ukumiswa kwesakhiwo se-roller rollers iqinisekisa ukuqhuba okuzinzile kunye nokuhamba okugqwesileyo.

    ● Izibane ezisemgangathweni ze-LED zokukhanya okuphezulu okukhanyayo ziphucula amandla okukhanyisa ngexesha lokusebenza ebusuku ukuze kuphunyezwe ukhuseleko oluphezulu kunye nokuthembeka.

  • 5. Ukugcinwa lula

    ● Ikhabhu ethambekayo inokuthambeka ngasemva kwi-45° ngempompo eyenziwa ngesandla ukuze kube lula ukugcinwa kunye neenkonzo zemibhobho ngaphakathi kumzimba womatshini.

    ● Isihluzo somoya we-injini, isihluzo se-oyile ye-injini, kunye nesihluzo se-fuel zicwangciswe kwindawo ekulula ukuyigcina.Izibuko lokuzalisa amafutha kunye nediphu ye-oyile ye-injini zibhekiswa ngaphandle.Izikhundla zokuzalisa igrisi zokulinganisela izikhonkwane zentsimbi kunye needyokhwe zijoliswe kwicala langaphandle lomzimba womatshini.

    ● Xa kuthelekiswa neemodeli zemveli, imodeli ye-hydrostatic drive inciphisa ubuninzi beendawo zokuqhuba nge->70% ukunciphisa ngokuphawulekayo iindawo zokungasebenzi kakuhle.

ipharamitha
Igama lepharamitha I-DH46-C3 RS
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg) 56000
Uxinzelelo oluphantsi (kPa) 120
Injini
Imodeli yenjini QSX 15
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm) 380/1800
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm) 9325*4320*3990
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h) F1: 0-11
Ukubuyisela umva isantya (km/h) I-R1: 0-11
Inkqubo yeChassis
Umgama osembindini wengoma (mm) 2260
Ububanzi bezihlangu zomzila (mm) 610
Ubude bomhlaba (mm) 3532
Umthamo wetanki
Itanki yamafutha (L) 920
Isixhobo esisebenzayo
Uhlobo lweblade Isiqingatha se-U
Ubunzulu bokwemba (mm) 660
Uhlobo lweRipper I-ripper enye-shank
Ubunzulu bokukrazula (mm) 1245
cebisa
  • IBULLDOZER SD17-C3
    SD17-C3
    AMANDLA ENTJINI:
    I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17000KG I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP10
  • IBULLDOZER SD16
    SD16
    AMANDLA ENTJINI:
    131kW/1850rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17,000kg (Eqhelekileyo) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WD10/WP10
  • BULLDOZER DH24-C3
    DH24-C3
    AMANDLA ENTJINI:
    173kW/195KW/213KW/1900 rpm China-III compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    23820kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP12G290E304
  • TRIMMING BULLDOZER STR23
    STR23
    AMANDLA ENTJINI:
    With 180kW/2000rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    25540kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • IBULLDOZER DH17-C3
    I-DH17-C3
    AMANDLA ENTJINI:
    152kW/1800rpm China-III iyahambelana I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17730kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP7G207E304
  • BULLDOZER SD24-C3
    SD24-C3
    AMANDLA ENTJINI:
    195KW/1900 rpm China-III compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    24700kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP12G265E304
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO