Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

IBULLDOZER

SD26
AMANDLA ENTJINI
206kW/1800rpm
Ubunzima BONKE
23400 kg (Esemgangathweni)
Imodeli yenjini
WP12
SD26
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Ulondolozo olulula
  • Ukuziqhelanisa nokusebenza
  • Indawo yokuqhuba/yokukhwela
  • Inkqubo yothumelo
  • Inkqubo yaMandla
  • Ulondolozo olulula

    ● Iinxalenye zesakhiwo zizuze umgangatho obalaseleyo weemveliso ezivuthiweyo ze-Shantui.

    ● Iintambo zombane zithatha imibhobho ekhuselweyo yokukhusela kunye ne-deconcentrators ye-branching, enezinga eliphezulu lokukhusela.

    ●Iihoods ezivulelekayo ezinesithuba esikhulu esisecaleni zenza ukulungisa nokugcina kube lula.

    ● Zonke iindawo zokuthambisa kunye nokugcinwa komatshini zijoliswe kwicala langaphandle lomzimba womatshini ukufezekisa ukugcinwa okulula kunye nokukhawuleza.

  • Ukuziqhelanisa nokusebenza

    ● Inkqubo ye-chassis yemveliso evuthiweyo ka-Shantui isetyenziswa kwiimeko ezahlukeneyo zokusebenza ezinzima, ezibonisa uzinzo oluphezulu nokuthembeka.

    ● Ubude bomhlaba omde, ukucoceka komhlaba okuphezulu, ukuqhuba okuzinzileyo, kunye nokuhamba kakuhle.

    ● Iblade yokuthambeka ethe tye, i-semi-U blade, i-U-blade, i-angle blade, i-coal blade, i-rock blade, iblade yococeko lwendalo esingqongileyo, i-ripper, kunye nefreyimu yokutsala ingafakelwa ngokuxhomekeke kwimeko ethile yokusebenza ukuze kuphunyezwe ukuguquguquka okuphezulu kokusebenza.Izibane ezikhethiweyo ze-LED ezisebenzayo ziphucula amandla okukhanyisa ngexesha lomsebenzi wasebusuku ukufezekisa ukhuseleko oluphezulu kunye nokuthembeka.

     

  • Indawo yokuqhuba/yokukhwela

    ● I-hexahedral cab inikeza indawo yangaphakathi enkulu kakhulu kunye nombono obanzi kwaye i-ROPS / FOPS inokufakwa ngokuxhomekeke kwiimfuno ezithile zokuqinisekisa ukhuseleko oluphezulu kunye nokuthembeka.

    ●Itheminali ekrelekrele yokubonisa kunye nolawulo kunye ne-A/C kunye nenkqubo yokufudumeza zifakelwe ukubonelela ngobuninzi obungakumbi bomntu wokuqhuba/amava okukhwela kwaye wenze ukuba uqonde isimo senkqubo nangaliphi na ixesha, ebonisa ubukrelekrele obuphezulu kunye nokulula.

     

  • Inkqubo yothumelo

    ● Iigophe zesixokelelwano sokuqhuba kunye ne-injini zihambelana ngokugqibeleleyo ukuze kuphunyezwe indawo ebanzi yomgangatho ophezulu kunye nempumelelo ephezulu yothumelo.

    ● I-self-made drive system ka-Shantui ibonisa ukusebenza okuzinzile kunye nomgangatho othembekileyo kwaye sele kudala ibonakaliswe yimarike.

  • Inkqubo yaMandla

    ● Injini ye-Weichai efakiweyo ihambelana nommiselo wokukhutshwa koomatshini be-China-III, ebonisa amandla anamandla, ukusebenza kakuhle okuphezulu kunye nokonga amandla, kunye neendleko eziphantsi zokugcinwa.

    ● Amandla alinganisiweyo afikelela kwi-175kW, equka ugcino lwetorque ephezulu.

    ●Inkqubo yokuthatha i-injini isebenzisa inkqubo yokungenisa etywiniweyo.

     

ipharamitha
Igama lepharamitha SD26 SD26E(INDLELA ENDE) SD26F(UKUGCINWA KWAMAHLATHI) I-SD26S(LGP)
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg) 23400 24600 24700 25700
Uxinzelelo oluphantsi (kPa) 77 72 66 41
Injini
Imodeli yenjini WEICHAI WP12 WEICHAI WP12 WEICHAI WP12 WEICHAI WP12
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm) 206/1800 206/1800 206/1800 206/1800
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm) 5495*3725*3402 5495*3725*3402 5495*3725*3402 6225*4365*3402
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h) F1: 0-3.8 F2:0-6.8 F3:0-11.7 F1: 0-3.8 F2:0-6.8 F3:0-11.7 F1: 0-3.8 F2:0-6.8 F3:0-11.7 F1: 0-3.8 F2:0-6.8 F3:0-11.7
Ukubuyisela umva isantya (km/h) R1:0-4.5 R2:0-8.1 R3:0-13.9 R1:0-4.5 R2:0-8.1 R3:0-13.9 R1:0-4.5 R2:0-8.1 R3:0-13.9 R1:0-4.5 R2:0-8.1 R3:0-13.9
Inkqubo yeChassis
Umgama osembindini wengoma (mm) 2000 2000 2000 2250
Ububanzi bezihlangu zomzila (mm) 560 560 560 910
Ubude bomhlaba (mm) 2730 3050 2730 3480
Umthamo wetanki
Itanki yamafutha (L) 450 450 450 450
Isixhobo esisebenzayo
Uhlobo lweblade Ukuthambeka ngokuthe tye Ukuthambeka ngokuthe tye Ukuthambeka ngokuthe tye Ukuthambeka ngokuthe tye
Uhlobo lweRipper Ishanki enye/3 amanqina Ishanki enye/3 amanqina Ishanki enye/3 amanqina —-
Ubunzulu bokukrazula (mm) 695/666 695/666 695/666 —-
cebisa
  • BULLDOZER DH46-C3
    DH46-C3
    AMANDLA ENTJINI:
    380kW/1800rpm China-Ⅲ compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    56000 kg (Standard) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • TRIMMING BULLDOZER STR13
    STR13
    AMANDLA ENTJINI:
    With 105kW/1900rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    14500kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • BULLDOZER SD13
    SD13
    AMANDLA ENTJINI:
    105kW/1900rpm I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    13,700kg (Standard) I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    SC8D143G2B1/SC8DK
  • BULLDOZER SD60-C5
    SD60-C5
    AMANDLA ENTJINI:
    With 450kW/1800rpm,this engine conforms to Euro-III A emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    70630kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • TRIMMING BULLDOZER STR23
    STR23
    AMANDLA ENTJINI:
    With 180kW/2000rpm, this engine conforms to China-III emission regulation. I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    25540kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
  • IBULLDOZER SD17-C3
    SD17-C3
    AMANDLA ENTJINI:
    I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17000KG I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP10
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO