Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

I-EXCAVATOR

SE135
Ubunzima BONKE
13500kg
UBUCHULE BEBHEKI
0.4 ~ 0.65 (0.55) m
AMANDLA ENTJINI
Ngama-86kW/2200rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
SE135
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Ubumbeko lwenkqubo ephezulu
  • Isixhobo sokusebenza esomeleziweyo
  • Qhuba ii-sprockets, ii-idlers, iirola zokulandela umkhondo, iirola zokuthwala, kunye neengoma
  • Ulawulo olukrelekrele lwe-elektroniki kunye nolawulo olufanelekileyo lwamandla
  • Indawo yokusebenza ebanzi nekhululekileyo
  • Ulondolozo olukhawulezayo noluluncedo
  • Izixhobo ezikhethiweyo zoomatshini
  • Izihlomelo ozikhethelayo
  • Ubumbeko lwenkqubo ephezulu

    ● Injini ye-turbocharged ehamba phambili kwihlabathi jikelele.

    ● Ubume behlabathi bodidi lokuqala lwe-hydraulic lubonisa uxinzelelo oluphezulu lokusebenza kunye nokulahlekelwa koxinzelelo oluphantsi.

  • Isixhobo sokusebenza esomeleziweyo

    ● Uyilo lwamalungu olwakhiwo luphuculwe ngokubanzi kwaye iindawo ezibalulekileyo zokuthwala imithwalo ziyaqiniswa ukumelana neemeko zokusebenza ezinzima.

    ● I-baseplates, i-side plates, kunye ne-reinforcement plates ye-emele zenziwe nge-high-power-resistant-resistant material ukuphucula ukuqina kwebhakethi.

    ● Amandla, ii-emele iingalo, kunye nee-emele ezineenkcukacha ezahlukeneyo zinokudityaniswa lula ukuze zivumelane neemeko zokusebenza ezahlukahlukeneyo.

  • Qhuba ii-sprockets, ii-idlers, iirola zokulandela umkhondo, iirola zokuthwala, kunye neengoma

    ● Ngeminyaka engama-30 ye-R&D kunye namava okwenziwa kwe-drive sprockets, ii-idlers, iirola zomzila, iirola zokuthwala, kunye neetrekhi kunye nobuchwepheshe obuphambili kushishino, lukhetho lokuqala olukhethwa ngabembi.

    ● Iinkqubo ezivuthiweyo nezikumgangatho ophezulu zokubunjwa kunye nonyango lobushushu ziqinisekisa umgangatho ozinzileyo nothembekileyo.

  • Ulawulo olukrelekrele lwe-elektroniki kunye nolawulo olufanelekileyo lwamandla

    ● Inkqubo yokulawula ekrelekrele iqonda eyona nto ifanelekileyo phakathi kwenkqubo yamandla kunye nenkqubo yehydraulic yokuphucula ukusebenza kakuhle kunye nokunciphisa ukusetyenziswa kwamafutha.

    ● Isizukulwana esitsha esikrelekrele senkqubo yokulawula umatshini sikwenza ukwazi ukukwazi ukulawula zonke iimeko zokusebenza kumatshini wakho.

    ● Iimowudi ezine zokusebenza kwangaphambili ze-P (Umthwalo onzima), E (Economic), A (Okuzenzekelayo), kunye no-B (I-Hammer yokuqhaqha) ibonisa ukutshintshela okulula.

     

  • Indawo yokusebenza ebanzi nekhululekileyo

    ● Imibala yamalungu angaphakathi adityaniswe ngenaliti alungelelaniswe ngokufanelekileyo ngokwe-ergonomics ukuthomalalisa ukudinwa okubonakalayo komsebenzisi.

    ● Izixhobo zokulawula zicwangciswe ngokufanelekileyo ukuqonda indawo enkulu, umbono obanzi, kunye nokusebenza ngokulula kunye nokukhululeka.

    ● Inkqubo ye-A/C yamandla aphezulu kunye nesihlalo esinesihlalo esine-air-cushioned siqinisekisa ukuqhuba kakuhle/ukukhwela.

  • Ulondolozo olukhawulezayo noluluncedo

    ● Ixhaswe zizisilinda ezimbini, isivalo se-injini esivula ngasemva sinokuvuleka okuluncedo, i-engile yokuvula enkulu, kunye nokugcinwa lula.

    ● Amalungu ombane alungiselelwa kwindawo esembindini ukwenzela ukuba kube lula ukujonga nokugcina.

    ● Ukuzaliswa kwesipholisi, ukutshintshwa kwesixhobo sokucoca umoya, kunye nesitshixo esinamandla sifikeleleka lula.

    ● I-radiator enxuseneyo ithintela ngokufanelekileyo ukufudumala kwaye yenza lula ukucoca.

    ● Isihluzo se-fuel element, isihluzo se-oyile ye-injini, kunye ne-pilot filter element zicwangciswe embindini ukuze lonke ugcino kunye nokutshintshwa kugqityezelwe kwindawo enye.

    ● Isixhobo sokucoca i-fuel echanekileyo sibonisa umthamo wamanzi aphezulu kunye nokuguquguquka okuqinileyo kwe-fuel kunye nempompo yokuhambisa umbane eqhotyoshelweyo ibonisa ukugcwalisa i-fuel ngokuzenzekelayo kunye nokuqalisa okulula.

  • Izixhobo ezikhethiweyo zoomatshini

    Impompo yokugalela amafutha

    Isibane sesilumkiso seCab

    Isibane sesilingi yeCab

    Umnatha wokukhusela wekhebhu ngaphezulu

    Ikhabhathi ngaphambili umnatha okhuselayo ophezulu

    Umnatha okhuselayo weCab ngaphambili

    Umkhondo werabha

    I-emele emxinwa

  • Izihlomelo ozikhethelayo

    I-crusher

    Ripper

    Ukubamba amaplanga

    I-Hydraulic tamper

    Ukubamba ilitye

    Ukudibanisa ngokukhawuleza utshintsho

    Umbhobho wesando wokwaphula

ipharamitha
Into yokuthelekisa SE135 (Uguqulelo oluqhelekileyo) SE135W(uguqulelo lwenjini yeWeichai)
Imilinganiselo ngokubanzi
Ubude bonke (mm) 7860 7860
Ubude bomhlaba (Ngexesha lothutho) (mm) 4320 4320
Ubude bubonke (Ukuya encotsheni yebhoom) (mm) 2800 2800
Ububanzi bubonke (mm) 2500 2500
Ubude bubonke (Ukuya phezulu kwekhebhu) (mm) 2855 2855
Ukucocwa komgangatho ochasene nobunzima (mm) 915 915
Ubuncinci bokukhutshwa komhlaba (mm) 425 425
Iradiyasi ejika umsila (mm) 2380 2380
Ubude bengoma (mm) 3645 3645
Igeyiji yokulandela umkhondo (mm) 2000 2000
Ububanzi bengoma (mm) 2500 2500
Ububanzi besihlangu somzila oqhelekileyo (mm) 500 500
Ububanzi obujikwayo (mm) 2490 2490
Umgama ukusuka kwiziko lokuxhela ukuya emsileni (mm) 2375 2375
Uluhlu lokusebenza
Obona bude bokugrumba (mm) 8495 8495
Obona bude bobude bokulahla (mm) 6060 6060
Obona bunzulu bokwemba (mm) 5490 5490
Ubona ubunzulu bokwemba obuthe nkqo (mm) 4625 4625
Owona mgama wokugrumba (mm) 8300 8300
Owona mgama wokwemba kumgangatho ophantsi (mm) 8175 8175
Isixhobo esisebenzayo ubuncinci beradiyasi yokujika (mm) 2445 2445
Obona bude buphakamileyo bokuphakama kwencakuba yebulldozer (mm) - -
Obona bukhulu bobunzulu bokwemba beblade yebhuludoza (mm) - -
Injini
Umzekelo QSF3.8T(China III) WP4.1(China III)
Uhlobo I-4-cylinder inline kunye ne-water-cooled kunye ne-turbocharged Umgca we-4-cylinder, uxinzelelo oluphezulu lukaloliwe oluqhelekileyo, kunye nokupholisa kwamanzi kunye ne-turbocharged
Ukufuduswa (L) 3.76 3.76
Amandla alinganisiweyo (kW/rpm) 86/2200 92/2200
Inkqubo ye-hydraulic
Uhlobo lwempompo ye-hydraulic Impompo yeplunger eguquguqukayo eguquguqukayo Impompo yeplunger eguquguqukayo eguquguqukayo
Ukuqukuqela okuthelekelelayo (L/min) 2×130 2×130
Ibhakethi
Umthamo we-emele (m³) 0.4~0.65 (0.55) 0.4~0.65 (0.55)
Inkqubo yokujingi
Esona santya sijingi siphezulu (r/min) 11.3 11.3
Uhlobo lwebrake Kusetyenziswe ngoomatshini kunye noxinzelelo olukhululiwe Kusetyenziswe ngoomatshini kunye noxinzelelo olukhululiwe
Amandla okumba
Amandla okwemba ingalo eemele (KN) 70 70
Amandla okwemba ibhakethi (KN) 97 97
Ubunzima bokusebenza kunye noxinzelelo lomhlaba
Ubunzima bokusebenza (kg) 13500 13500
Uxinzelelo oluphantsi (kPa) 41.5 41.5
Inkqubo yokuhamba
Imoto ehambayo I-Axial variable displacement plunger motor I-Axial variable displacement plunger motor
Isantya sokuhamba (km/h) 3.25/5.2 3.25/5.3
Amandla okutsala (KN) 118 118
Ukuba nenqanaba 70% (35°) 70% (35°)
Umthamo wetanki
Umthamo wetanki yesibaso (L) 220 245
Inkqubo yokupholisa (L) 20 20
Umthamo we-oyile ye-injini (L) 12 12
Itanki yeoli yeHydraulic/umthamo wenkqubo (L) 177/205L 177/205L
cebisa
  • I-EXCAVATOR SE205W
    SE205W
    Ubunzima BONKE:
    21200kg
    UBUCHULE BEBHEKE:
    0.45~1.2(0.9)m³
    AMANDLA ENTJINI:
    Nge-129kW/2200rpm, le njini ihambelana nomthetho we-China-III wokukhutshwa.
  • I-EXCAVATOR SE470LC
    I-SE470LC
    Ubunzima BOSEBENZA:
    46800kg
    UBUCHULE BEBHEKE:
    0.55~2.5(2.2)m³
    AMANDLA ENTJINI:
    Ngama-250kW/2000rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
  • EXCAVATOR SE220
    SE220
    Ubunzima BONKE:
    21900kg
    UBUCHULE BEBHEKE:
    1.05m³
    AMANDLA ENTJINI:
    With 124kW/2050rpm, this engine conforms to China-Ⅱ emission regulation.
  • EXCAVATOR SE17SR
    SE17SR
    Ubunzima BONKE:
    1800kg
    UBUCHULE BEBHEKE:
    0.04m³
    AMANDLA ENTJINI:
    11.8kW, this engine conforms to Euro V/EPA Tier 4F emission regulation.
  • I-EXCAVATOR SE150
    SE150
    Ubunzima BONKE:
    13500kg
    UBUCHULE BEBHEKE:
    0.4 ~ 0.65 (0.55) m
    AMANDLA ENTJINI:
    Ngama-86kW/2200rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
  • EXCAVATOR SE210-9
    SE210-9
    Ubunzima BONKE:
    20800kg
    UBUCHULE BEBHEKE:
    0.9m³
    AMANDLA ENTJINI:
    With 112kW/1950rpm, this engine conforms to China-III emission regulation
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO