Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

I-EXCAVATOR

SE215
Ubunzima BONKE
20800kg
UBUCHULE BEBHEKI
0.90m³
AMANDLA ENTJINI
Ngama-86kW/2200rpm, le njini ihambelana nommiselo wokuphuma kweTshayina-III
SE215
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Izihlomelo ozikhethelayo
  • Izixhobo ezikhethiweyo zoomatshini
  • Ulondolozo olukhawulezayo noluluncedo
  • Indawo yokusebenza ebanzi nekhululekileyo
  • Ulawulo olukrelekrele lwe-elektroniki kunye nolawulo olufanelekileyo lwamandla
  • Qhuba ii-sprockets, ii-idlers, iirola zokulandela umkhondo, iirola zokuthwala, kunye neengoma
  • Isixhobo sokusebenza esomeleziweyo
  • Ubumbeko lwenkqubo ephezulu
  • Izihlomelo ozikhethelayo

    Isando sokuqhekeza

    Ripper

    Ukubamba amaplanga

    I-Hydraulic tamper

    Ukubamba ilitye

    Ukudibanisa ngokukhawuleza utshintsho

    Umbhobho wesando wokwaphula

  • Izixhobo ezikhethiweyo zoomatshini

    ● Isihluzi somoya sohlobo lwebhafu ye-oyile ● Isibane sesilumkiso seCab ● Ikhamera engasemva yomzimba

    ● Umnatha okhuselayo wekhabhathi ● Umnatha okhuselayo weCab ngaphambili ● Umnatha okhuselayo weCab ngaphambili.

    ● I-700mm isihlangu somzila ● 800mm isihlangu somzila ● Impompo yombane yokufaka i-refueling

    ● Umatshini wokugada ● Ukucheba nge-hydraulic

     

  • Ulondolozo olukhawulezayo noluluncedo

    ● Ixhaswe zizisilinda ezimbini, isivalo se-injini esivula ngasemva sinokuvuleka okuluncedo, i-engile yokuvula enkulu, kunye nokugcinwa lula.

    ● Amalungu ombane alungiselelwa kwindawo esembindini ukwenzela ukuba kube lula ukujonga nokugcina.

    ● Ukuzaliswa kwesipholisi, ukutshintshwa kwesixhobo sokucoca umoya, kunye nesitshixo esinamandla sifikeleleka lula.

    ● I-radiator enxuseneyo ithintela ngokufanelekileyo ukufudumala kwaye yenza lula ukucoca.

    ● Isihluzo se-fuel element, isihluzo se-oyile ye-injini, kunye ne-pilot filter element zicwangciswa embindini ukuze lonke ugcino kunye nokutshintshwa kugqitywe ukusuka kwindawo enye.

    ● Isixhobo sokucoca i-fuel echanekileyo sibonisa ukuguquguquka okunamandla kwe-fuel kunye nomsebenzi wokupompa i-fuel yombane unikezelwa ngokuzaliswa kwe-fuel ngokuzenzekelayo kunye nokuqalisa okulula.

  • Indawo yokusebenza ebanzi nekhululekileyo

    ● Imibala yamalungu angaphakathi adityaniswe ngenaliti alungelelaniswe ngokufanelekileyo ngokwe-ergonomics ukuthomalalisa ukudinwa okubonakalayo komsebenzisi.

    ● Izixhobo zokulawula zicwangciswe ngokufanelekileyo ukuqonda indawo enkulu, umbono obanzi, kunye nokusebenza ngokulula kunye nokukhululeka.

    ● Inkqubo ye-A/C yamandla aphezulu kunye nesihlalo esinesihlalo esinomoya siqinisekisa ukuqhuba kakuhle/ukukhwela.

  • Ulawulo olukrelekrele lwe-elektroniki kunye nolawulo olufanelekileyo lwamandla

    ● Inkqubo yokulawula ekrelekrele iqonda ukuhambelana okuphezulu phakathi kwenkqubo yamandla kunye nenkqubo yoxinzelelo lwe-hydraulic ukuphucula ukusebenza kakuhle kunye nokunciphisa ukusetyenziswa kwamafutha.

    ● Isizukulwana esitsha esikrelekrele senkqubo yokulawula umatshini sikwenza ukwazi ukukwazi ukulawula zonke iimeko zokusebenza kumatshini wakho.

    ● Iimowudi ezine zokusebenza kwangaphambili ze-P (Umthwalo onzima), E (Economic), A (Okuzenzekelayo), kunye no-B (I-Hammer yokuqhaqha) ibonisa ukutshintshela okulula.

  • Qhuba ii-sprockets, ii-idlers, iirola zokulandela umkhondo, iirola zokuthwala, kunye neengoma

    ● Iminyaka engama-30 ye-R&D kunye namava okwenziwa kwe-drive sprockets, ii-idlers, iirola zomzila, iirola zokuthwala, iingoma kunye nobuchwepheshe obuphambili kushishino.

    ● Iinkqubo ezivuthiweyo nezikumgangatho ophezulu zokubunjwa kunye nonyango lobushushu ziqinisekisa umgangatho ozinzileyo nothembekileyo.

  • Isixhobo sokusebenza esomeleziweyo

    ● Uyilo lwamalungu olwakhiwo luphuculwe ngokubanzi kwaye iindawo ezibalulekileyo zokuthwala imithwalo ziyaqiniswa ukumelana neemeko zokusebenza ezinzima.

    ● I-baseplates, i-side plates, kunye ne-reinforcement plates ye-emele zenziwe nge-high-power-resistant-resistant material ukuphucula ukuqina kwebhakethi.

    ● Amandla, ii-emele iingalo, kunye nee-emele ezineenkcukacha ezahlukeneyo zinokudityaniswa lula ukuze zivumelane neemeko zokusebenza ezahlukahlukeneyo.

     

  • Ubumbeko lwenkqubo ephezulu

    ● Injini ye-turbocharged ehamba phambili kwishishini.

    ● I-high-end ethembekileyo yokumisela inkqubo ye-hydraulic system kunye ne-electronic-control epheleleyo yokuhamba kakuhle kwenkqubo ye-hydraulic inciphisa ukulahlekelwa kwamandla kunye nokuqinisekisa ukusebenza kakuhle okuphezulu kunye nokugcina amandla kunye nokulungelelaniswa kakuhle kwentshukumo.

ipharamitha
Into yokuthelekisa SE215 (Uguqulelo oluqhelekileyo)
Imilinganiselo ngokubanzi
Ubude bonke (mm) 9625
Ubude bomhlaba (Ngexesha lothutho) (mm) 4915
Ubude bubonke (Ukuya encotsheni yebhoom) (mm) 3075
Ububanzi bubonke (mm) 2800
Ubude bubonke (Ukuya phezulu kwekhebhu) (mm) 3055
Ukucocwa komgangatho ochasene nobunzima (mm) 1075
Ubuncinci bokukhutshwa komhlaba (mm) 470
Iradiyasi ejika umsila (mm) 2925
Ubude bengoma (mm) 4140
Igeyiji yokulandela umkhondo (mm) 2200
Ububanzi bengoma (mm) 2800
Ububanzi besihlangu somzila oqhelekileyo (mm) 600
Ububanzi obujikwayo (mm) 2725
Umgama ukusuka kwiziko lokuxhela ukuya emsileni (mm) 2920
Uluhlu lokusebenza
Obona bude bokugrumba (mm) 10095
Obona bude bobude bokulahla (mm) 7190
Obona bunzulu bokwemba (mm) 6490
Ubona ubunzulu bokwemba obuthe nkqo (mm) 5915
Owona mgama wokugrumba (mm) 9860
Owona mgama wokwemba kumgangatho ophantsi (mm) 9675
Isixhobo esisebenzayo ubuncinci beradiyasi yokujika (mm) 2970
Obona bude buphakamileyo bokuphakama kwencakuba yebulldozer (mm) -
Obona bukhulu bobunzulu bokwemba beblade yebhuludoza (mm) -
Injini
Umzekelo ICummins QSB7 (eTshayina-III)
Uhlobo I-6-cylinder, i-high pressure common rail, kunye ne-water-cooled kunye ne-turbocharged
Ukufuduswa (L) 6.7
Amandla alinganisiweyo (kW/rpm) 124/2050
Inkqubo ye-hydraulic
Uhlobo lwempompo ye-hydraulic Impompo yeplunger eguquguqukayo eguquguqukayo
Ukuqukuqela okuthelekelelayo (L/min) 2×213
Ibhakethi
Umthamo we-emele (m³) 0.9
Inkqubo yokujingi
Esona santya sijingi siphezulu (r/min) 11
Uhlobo lwebrake Kusetyenziswe ngoomatshini kunye noxinzelelo olukhululiwe
Amandla okumba
Amandla okwemba ingalo eemele (KN) 135/146
Amandla okwemba ibhakethi (KN) 99/107
Ubunzima bokusebenza kunye noxinzelelo lomhlaba
Ubunzima bokusebenza (kg) 20800
Uxinzelelo oluphantsi (kPa) 47.5
Inkqubo yokuhamba
Imoto ehambayo I-Axial variable displacement plunger motor
Isantya sokuhamba (km/h) 3.15/5.15
Amandla okutsala (KN) 214
Ukuba nenqanaba 70% (35°)
Umthamo wetanki
Umthamo wetanki yesibaso (L) 330
Inkqubo yokupholisa (L) 28
Umthamo we-oyile ye-injini (L) 22
Itanki yeoli yeHydraulic/umthamo wenkqubo (L) 270/400
cebisa
  • I-Excavator SE500LC
    SE500LC
    Ubunzima BOSEBENZA:
    49500kg
    UBUCHULE BEBHEKE:
    2.5~3.0(2.5)m³
    AMANDLA ENTJINI:
    Ngama-280kW/2000rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
  • I-EXCAVATOR SE210-9
    SE210-9
    Ubunzima BONKE:
    20800kg
    UBUCHULE BEBHEKE:
    0.9m³
    AMANDLA ENTJINI:
    Nge-112kW/1950rpm, le njini ihambelana nomthetho wokukhutshwa kwe-China-III
  • EXCAVATOR SE220
    SE220
    Ubunzima BONKE:
    21900kg
    UBUCHULE BEBHEKE:
    1.05m³
    AMANDLA ENTJINI:
    With 124kW/2050rpm, this engine conforms to China-Ⅱ emission regulation.
  • EXCAVATOR SE470LC
    SE470LC
    Ubunzima BOSEBENZA:
    46800kg
    UBUCHULE BEBHEKE:
    0.55~2.5(2.2)m³
    AMANDLA ENTJINI:
    With 250kW/2000rpm , this engine conforms to China-III emission regulation.
  • EXCAVATOR SE210W
    SE210W
    Ubunzima BONKE:
    20500kg
    UBUCHULE BEBHEKE:
    0.9m³
    AMANDLA ENTJINI:
    With 116kW/2000rpm, this engine conforms to China-III emission regulation.
  • I-EXCAVATOR SE135
    SE135
    Ubunzima BONKE:
    13500kg
    UBUCHULE BEBHEKE:
    0.4 ~ 0.65 (0.55) m
    AMANDLA ENTJINI:
    Ngama-86kW/2200rpm, le njini ihambelana nommiselo we-China-III wokukhutshwa.
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO