Incwadana yemveliso iyafumaneka ukukhuphela nanini na
Nceda ushiye ulwazi lwakho ngezantsi ngolwazi oluthe kratya lwemveliso
Ndifunde ngononophelo kwaye ndamkele eqhotyoshelweyoISivumelwano saBucala

NQAKULE I-COMPACTOR

I-SR26MR-3
Ubunzima BONKE
26000kg
AMANDLA ENTJINI
Nge-178kW/2200rpm, le njini ihambelana nomthetho wokukhutshwa kwe-China-III.
UBUBANDLA OBUHLANGANISAYO
3360mm
I-SR26MR-3
  • Iimpawu
  • iiparamitha
  • iimeko
  • iingcebiso
uphawu
  • Iindleko zokusebenza
  • Ukusebenza kokusebenza
  • Ukulungeleka okuphezulu
  • Induduzo yokusebenza ephezulu
  • Induduzo yokusebenza ephezulu
  • Iindleko zokusebenza

    ● Ubuchwephesha bokuhambelana kobumnini kunye negophe lamandla afanelekileyo linokufikelela ukusebenza kakuhle okuphezulu kunye noqoqosho olufanelekileyo lwamafutha kunye nokunciphisa ukusetyenziswa kwamafutha adibeneyo nge-5% ~ 8%.

    ● Awona malungu angundoqo ombane kunye ne-hydraulic yeempawu ezithunyelwa ngaphandle ziqinisekisa ukuthembeka okuphezulu kwaye zinciphisa ukungasebenzi kakuhle kwexesha.

    ● Ukugcinwa kwexabiso eliphezulu.

  • Ukusebenza kokusebenza

    ● I-Weichai efakwe kwi-China-III injini yokulawula i-electronic inokugcina umatshini phantsi komgangatho ongcono wokusebenza ngamandla anamandla ukuqinisekisa umgangatho wokudibanisa kunye nokusebenza okuphezulu kunye nokugcina amandla.

    ● Isixokelelwano sokuqhuba amandla ngoomatshini ngoomatshini siyilwe ngobungcali kwaye senziwa ngokuchanekileyo ngokukodwa ukulungiselela imeko-bume yokucocwa kwenkunkuma emandla kwaye ibonelele ngemveliso ephezulu.

    ● I-blade yomthamo ophezulu inokukhupha inkunkuma ngexesha lokudibanisa ukuphucula ukusebenza kakuhle.

    ● Igubu elidityanisiweyo eliyilwe ngobungcali liqinisekisa ukudityaniswa okusebenzayo kunye nokutyumzwa kwenkunkuma.Amazinyo ahlanganiseneyo enziwe ngezinto ezikwaziyo ukugxwala nokungagugi ukuze andise ubomi begubu elidibanisayo.

  • Ukulungeleka okuphezulu

    ● Iindawo zokuthambisa zicwangciswe kwindawo esembindini kwaye ihood engasemva ithatha isakhiwo esivulelekayo esidityanisiweyo ukuphucula ukulungiswa nokugcinwa lula.

    ● Uqhagamshelo phakathi kwencakuba kunye nefreyimu yangaphambili yamkela isihlalo esisodwa esifakwe isigqubuthelo esinebholiti kunye nebhola edibeneyo ukuze kube lula ukudityaniswa, okunokutshintshwa ngokulula ukuba inxitywe.

  • Induduzo yokusebenza ephezulu

    ● Uyilo lokuthambisa oluzisebenzelayo olusembindini lwenza lula ugcino lomsebenzisi kwaye ihood engasemva yamkele isakhiwo esivulelekayo esidityanisiweyo kwaye ikhabhu inokuthambekela i-50 ° ukukhuthaza ukulungiswa kunye nokugcinwa lula.

    ● Uqhagamshelo phakathi kwencakuba kunye nefreyimu yangaphambili yamkela isihlalo esisodwa esifakwe isigqubuthelo esinebholiti kunye nebhola edibeneyo ukuze kube lula ukudityaniswa, okunokutshintshwa ngokulula ukuba inxitywe.

  • Induduzo yokusebenza ephezulu

    ● I-cab evaliweyo kunye ne-air purifier inokugada umqhubi ngokuchasene nefuthe lendawo yokusebenza enzima.

    ● Ukuhamba komatshini kulawulwa ngolawulo lwe-elektroniki olutshintshayo lokudlala ukuze kuphunyezwe imisebenzi etofotofo kunye neluncedo, ukunciphisa ngokufanelekileyo ukudinwa komsebenzisi, kunye nokuphucula ukusebenza kakuhle.

    ● Ukuphakanyiswa kwe-blade kulawulwa yi-joystick yokulawula i-elektroniki ukuze kuphunyezwe imisebenzi elula, eguquguqukayo, kunye nefanelekileyo.

    ● Isihlalo esine-cushion esikhululekile silungelelaniswa kwindawo ye-longitudinal kwaye ifakwe kunye neendawo zokugoba zekhohlo kunye nekunene kunye nebhanti lesihlalo esihlawulekayo kunye ne-A / C kunye nenkqubo yokufudumeza ifakwe ukuphumeza imisebenzi ekhuselekileyo kunye nekhululekile.

    ● Iimonitha zamehlo ezingaphakathi kwikhabhi zisisiqinisekiso sokhuseleko kwimisebenzi yokubuyisela umva rhoqo kwe-compactor.

ipharamitha
Igama lepharamitha SR26MR-3 (Uguqulelo oluqhelekileyo)
Iiparamitha zokusebenza
Ubunzima bokusebenza (Kg) 26000
Amandla avuyisayo (KN) -
Ukungcangcazela rhoqo (Hz) -
Ukuphakama kwegama (mm) -
Uxinzelelo oluphantsi (KPa) -
Umgangatho (%) -
Injini
Imodeli yenjini WP10
Amandla alinganisiweyo/isantya esikalisiweyo (kW/rpm) 178/2200
Imilinganiselo ngokubanzi
Imilinganiselo epheleleyo yomatshini (mm) 7930*3660*3925
Ukuqhuba ukusebenza
Isantya sokuya phambili (km/h) 4.82/7.66/11.6
Ukubuyisela umva isantya (km/h) 4.82/7.66
Inkqubo yeChassis
Isiseko samavili (mm) -
Umthamo wetanki
Itanki yamafutha (L) 440
Isixhobo esisebenzayo
Ukuhlanganisa ububanzi (mm) 3360
cebisa
  • MINING TRUCK SK105
    SK105
    TOTAL MASS:
    105000 kg
    ENGINE MODEL:
    WP12.460/WP13.480/WP13.530
    AMANDLA ENTJINI:
    WP12.460/WP13.480/WP13.530
  • DOUBLE-DRUM ROLLER SRD10
    SRD10
    Ubunzima BONKE:
    10000kg
    AMANDLA ENTJINI:
    82kW/2200rpm China-II
    UKUHLANGANISA UBUNZI:
    1700mm
  • BULLDOZER DH17-C3
    DH17-C3
    AMANDLA ENTJINI:
    152kW/1800rpm China-III compliant I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Ubunzima BONKE:
    17730kg I-140KW/1900RPM YASETSHAYINA-II IQHELEKILEYO
    Imodeli yenjini:
    WP7G207E304
  • ROAD MILLING MACHINE SMT50-C6N
    SMT100M-C6
    AMANDLA ENTJINI:
    With 160kW/2200rpm, this engine conforms to China-III emission regulation.
    Ubunzima BONKE:
    14500kg
    MILLING WIDTH:
    1000mm
  • STATIC ROLLER SR1215S
    SR1215S
    Ubunzima BONKE:
    12000~15000kg
    AMANDLA ENTJINI:
    With 82kW/2000 , this engine conforms to China-IIemission regulation.
    UKUHLANGANISA UBUNZI:
    2120mm
  • CONCRETE MIXING EQUIPMENT ENGINEERING STATION/F SERIES
    STANDARD COMMERCIAL CONCRETE MIXING TOWER S SERIES
    RATED PRODUCTIVITY:
    25-75m³/h
    DRIVE POWER:
    22-2x30kW
    DISCHARGE CAPACITY:
    500~3000L
IZIXHOBO KUNYE NONCEDO LWENGCALI NGALO LONKE IJIKO