Imanuwali yomkhiqizo iyatholakala ukuze ilandwe noma kunini
Sicela ushiye imininingwane yakho ngezansi ukuze uthole ulwazi olwengeziwe lomkhiqizo
Ngifunde ngokucophelela futhi ngamukele okunamathiselweIsivumelwano Sobumfihlo

UMSHINI WOKUGAYA

I-SMT100M-C6
AMANDLA EZINJINI
Le njini enamandla angu-160kW/2200rpm ihambisana nomthetho we-China-III emission regulation.
Isisindo sisonke
14500kg
UKUGULA UBUNZI
1000mm
I-SMT100M-C6
  • Izici
  • imingcele
  • amacala
  • izincomo
isici
  • Isistimu yeDrayivu
  • Ukuhlanganiswa kwe-rotor yokugaya
  • Uhlelo lokuhamba
  • Ukugcinwa okulula
  • Ubuhlakani obuphezulu
  • Isistimu yeDrayivu

    ● Injini elawulwa ngogesi ye-SDEC ivumelana nomthetho we-China-III wokukhishwa kwemishini engekho emgwaqweni, ebonisa ubuhlakani obuphezulu nokusebenza kahle, izingxenye eziphakeme zomhlaba wonke, kanye nezindleko zokunakekela eziphansi.

    ● Ubuchwepheshe bokonga ugesi, okuhlanganisa ukuzenzela injini, kusetshenziselwa ukubona ukonga kukaphethiloli okungcono, umthamo ophansi wokukhipha ugesi, nokusebenza kahle okuphezulu kwawo wonke umshini.

    ● Isigubhu sokugaya sishayelwa ibhande eliwumshini futhi ibhande lokushayela lidonsa kanzima ngamanzi, lifaka ukusebenza kahle kokushayela okuphezulu, umthelela wokusebenza oncishiswe ngempumelelo, kanye nokudluliswa kwamandla okuzinzile nokuthembekile.

  • Ukuhlanganiswa kwe-rotor yokugaya

    ● Amapuleti aseceleni ezinhlangothini ezimbili aphakanyiswa ngamanzi.

    ● Imigqomo yokuzikhethela yezomnotho kanye neyokugcina inikezwa ukuze ihlangabezane nezimfuneko zokusebenza ezihlukene.

    ● Ukushoda kwamanzi kanye nemisebenzi yesixwayiso yesivimbelo sohlelo lwamanzi kuqinisekisa ngempumelelo ukupholisa nokucindezelwa kothuli futhi andise impilo yomsiki wokugaya.

  • Uhlelo lokuhamba

    ● Isistimu yokuhamba isebenzisa i-full-hydraulic four-wheel drive ukuze ifinyelele izinga elinamandla futhi ishayele ungene noma usuke emotweni yokuthutha ene-flat-bed ngokuziqhuba ngokuphepha kakhulu.

    ● Ingcindezi yokusebenza yesistimu yokuhamba ingu->375bar, ehlanganisa amandla okudonsa anamandla.

    ● Isistimu yokuhamba ihlanganisa umsebenzi wokusabalalisa ophoqelelwe ukuze kuvinjelwe ngempumelelo ukushelela.

    ● Ijubane lokuhamba lifika ku-8km/h.

    ● Ikholomu engemuva kwesokudla iyakwazi ukuzungezisa okungu-180º ukuze uthole imisebenzi yomgwaqo.

  • Ukugcinwa okulula

    ● Izingxenye zesakhiwo zizuza ikhwalithi enhle kakhulu yemikhiqizo evuthiwe ka-Shantui.

    ● Idizayini enkulu yokuvula ihood yenjini nezicabha eziseceleni inikeza igumbi elivulekile lokunakekelwa.

    ● Izingxenye eziwumgogodla zikagesi neze-hydraulic zisebenzisa imikhiqizo evela kwamanye amazwe, enekhwalithi ezinzile nethembekile nokuthembeka okuphezulu kakhulu.

    ● Isihlungi sangaphandle sikaphethiloli/samafutha kanye nemibhobho yamafutha kufakwa ngendlela elengayo ukuze kube lula ukulondolozwa nokushintshwa.

  • Ubuhlakani obuphezulu

    ● Imodi yokulawula inethiwekhi yedijithali yebhasi ye-CAN isetshenziswa ukuze kuqinisekiswe ngempumelelo ukulawula okuzenzakalelayo nokuvikelwa kwakho konke ukunyakaza komshini.

    ● Izixhumi ezibonakalayo ezifakiwe zomshini womuntu zingabonisa emaphakathi imingcele yokusebenza yedijithali yomshini.

    ● Ulwazi lokuzihlolela ukungasebenzi kahle kanye nesixwayiso nolwazi lokwaziswa kubona ukusebenza okuphephile nokusebenza kahle komshini.

    ● Kusetshenziswa ubuchwepheshe obuthuthukisiwe be-electro-hydraulic proportional proportional control kanye nesistimu yokulinganisa ezenzakalelayo ingafakwa ukuze kubonwe ukulawula okunembile kokujula kokugaya kanye nokusebenza kahle kokugaya okunenzuzo ngokusobala.

ipharamitha
Igama lepharamitha I-SMT100M-C6
Amapharamitha wokusebenza
Isisindo sokusebenza (Kg) 15200
Isisindo sokuthutha(Kg) 14500
Ubukhulu bobubanzi bokugaya (mm) 1000
Ubukhulu bokujula kokugaya (mm) 300
Injini
Imodeli yenjini I-SC9D
Amandla alinganiselwe/isivinini esikaliwe (kW/rpm) 160/2200
Izilinganiso sezizonke
Izilinganiso eziphelele zomshini (mm) 12210*2385*2545
Ukusebenza kokushayela
Isivinini sokuhamba (km/h) 0-8
Isivinini sokusebenza (m/min) 0-30
I-Conveyor System
Ububanzi bebhande lokuthutha (mm) 500
I-engeli ye-Swing yesidluliseli (Kwesokudla/kwesokunxele) (°) 25/20
Umthamo wethangi
Ithangi lamafutha (L) 540
Idivayisi esebenzayo
Inombolo yabasiki bokugaya (Ucezu) 94
AMACALA
ncoma
  • BULLDOZER SD26
    SD26
    AMANDLA ENJINI:
    206kW/1800rpm 140KW/1900RPM I-CHINA-II COMLIAN
    Isisindo SONKE:
    23400 kg(Standard) 140KW/1900RPM I-CHINA-II COMLIAN
    Engine model:
    WP12
  • STANDARD MOTOR GRADER SG16-3
    SG16-3
    AMANDLA ENJINI:
    With118kW/2200,this engine conforms to China-II non-road machinery emission regulation
    Isisindo SONKE:
    15100kg
    WIDTH OF SHOVEL BLADE:
    3660mm
  • REMOTE CONTROL DOUBLE DRUM SRD900W
    SRD900W
    Isisindo SONKE:
    870kg
    AMANDLA ENJINI:
    With 6kW/3600rpm, this engine conforms to China-Ⅲ emission regulation
    UBUNZI BOKUHLANGANISA:
    680mm
  • BULLDOZER SD16
    SD16
    AMANDLA ENJINI:
    131kW/1850rpm 140KW/1900RPM I-CHINA-II COMLIAN
    Isisindo SONKE:
    17,000kg (Standard) 140KW/1900RPM I-CHINA-II COMLIAN
    Engine model:
    WD10/WP10
  • STANDARD LOADER SL50WN
    SL50WN
    OPERATING WEIGHT:
    17100kg
    Amandla Ebhakede:
    3m³
    AMANDLA ENJINI:
    162kW/2000rpm
  • BULLDOZER SD90-C5
    SD90-C5
    AMANDLA ENJINI:
    With 708kW/2100rpm, this engine conforms to China-III emission regulation. 140KW/1900RPM I-CHINA-II COMLIAN
    Isisindo SONKE:
    106260kg 140KW/1900RPM I-CHINA-II COMLIAN
AMATHULUSI NOSIZO LOCHWEPHESHE NGAWO WONKE Ithuba